3part Hematology analyzer x3
تعلن الشركة عن توافر أجهزة عد الدم الاوتوماتيكي من عملاق الصناعة الصينية شركة LANDWIND
جهاز Model LD-X3 3 Part Diff. Hematology Analyzer
Impedance Method technology
20 Parameter – 3 Histogram
2 Channel for WBC, RBC, PLT
Hb test Colorimetric LED 540nm
Cyanide free reagents
-60 اختبار / الساعة
-الجهاز Open System
-شاشة تاتش 10.4 بوصة ويمكن توصيلة بـ Mouse وKeyboard خارجي
-طابعة داخلي مع إمكانية توصيلة بطابعة خارجي
-ذاكرة تخزينية 10000 عينة
-محاليل الجهاز Diluent و Lyse فقط
-اقل حجم عينة 20 ⴓوالجهاز يحتوي على برنامج تخفيف العينة
-خاصية الـ Auto-clean
-Barcode reader ويدعم توصيل LIS
الجهاز حاصل على شهادات الـCE و الايزو 1
AquaRO² & EDI²
he new pure water systems AquaRo² and EDI² provide you with reliable and compact systems which produce up to ASTM Type II grade water. Both systems ensure high comfort at low operating costs.
Both systems are equipped with a pretreatment of activated carbon and softening components. AquaRo² systems are equipped with a reverse osmosis (RO) and EDI² with an additional electro deionization (EDI) cell to produce de-ionized water of Type II. The systems are equipped with 10 l, 35 l, 70 l or an individual sized storage reservoir which are filled with a production rate of 5-40 l/h. The de-ionized water can be dispensed with a fixed and flexible dispenser. As an additional option the new AquaRo² and EDI² models enable remote diagnosis and service via Internet. This Remote Check offers you the opportunity to save time and money by fast and reliable support through the service team.
This product guide shows the range of our labwater systems and will help to select the best system for your needs.
typical specifications
Aquinity² P10
The Aquinity² P10 ultrapure water system is equipped with a reverse osmosis (RO) cell to produce deionised water directly into an integrated 10l tank.
Aquinity² models produce ultrapure water directly from municipal or potable tap water. In the next step Type I grade water is produced with a polisher cartridge.
The Aquinity² P10 model is ideal for laboratories with a limited daily need for ultrapure water.
Aquinity² P35 / P70
Aquinity² P35/P70 versions have an independent tank from which RO water can be tapped (e.g. for glassware cleaning).
The water quality from this tank depends on the feed water quality; in general the RO holds back 98% of all ions. The tank can be installed at the side or above the system or even underneath the bench.
Tapping of ultrapure water is done with our flexible but also lockable dispenser as incorporated in all membraPure ultrapure water systems. Built-in TOC monitoring is also available with the Aquinity² P35/P70 versions.
Aquinity² P35/P70 is the perfect system for a medium-sized lab.
- Permeate rate: 10 l/h
- Resistivity: 18.2 MOhm x cm
- Reservoir: 35 l or 70 l
- Flow Rate UPW: 2 l/min
- TOC < 10 ppb (Reagent) < 3 ppb (Analytical with UV) < 5 ppb (LifeScience with UV and UF)
- Endotoxins: < 0.001 EU/ml endotoxins (LifeScience)